The Ukulele is a Hawaiian four-stringed instrument with warm, rich sounds such as the Hawaiian sun. Before use, the most important step is to turn the four strings on the ukulele into standard sounds, where the electronic tuner can help, and its use is very simple. Clip the tuner to the position where the guitar vibrates.
This makes it easy to observe the changes in the display. The start button is adjusted to CHROMA or UKU mode for tuning. Take 1 as an example, dial 1 string A (the fingerboard part does not need to press, dial the string), check the contents displayed by the tuner, usually display normal sound (C, D, E, F, G, in either case) .
Next, you need to tighten the string clockwise, and vice versa (A, B, C, then release), and adjust the letter to A to basically adjust the pitch of the string. In order to make the pitch more precise, you need to look at the pointer of the display. Fine-tuning. When the tuner's display pointer is off and the display is white, the pitch is very low. When the display pointer is on the right side and the display is white, the pitch is very high, immediately rotate the tuning handle to center the pointer, then the screen changes to Green and adjust the tone.
If you don't want to buy a tuner, you can download the tuning software on your phone. In the application market search tuner, you will see a lot of tuning software, choose multi-person download, comment better software, because the phone tuning is based on the phone microphone to judge, so it is easy to be affected by the outside world, it is best to adjust Choose a relatively quiet place for the sound.
Edit by Height Musical Instrument News Department